BMW ALPINA B3

Technical Data

BMW ALPINA B3 Saloon AWD

Engine

Cylinders6 in line
Capacity (cc)2993
Bore (mm)84,0
Stroke (mm)90,0
Compression ratio (:1)9,3
Max output (kW (hp) / rpm)340 (462) / 5000-7000
Max torque (Nm / 1/min)700 / 3000-4250
Engine managementBOSCH DME 8.6 S
Fuel type98-octane
Emissions classificationEuro 6d-ISC-FCM

Performance

Acceleration 0-100 km/h (s)3,8
Top speed (km/h)303

Fuel consumption *

Urban (l/100km)13,2
Extra-urban (l/100km)7,9
Combined (l/100km)9,8
CO2 emissions combined (g/km)224
CO2 efficiencyF

Transmission

Type8-Speed Sport-Automatic ZF 8HP76 SWITCH-TRONIC
1st5,00
2nd3,20
3rd2,14
4th1,72
5th1,31
6th1,00
7th0,82
8th0,64
Final drive ratio2,81

Wheels and tyres

Standard wheels and tyresALPINA DYNAMIC 19"
Front8,5 x 19 255/35 ZR19
Rear9,5 x 19 265/35 ZR19

Dimensions

Length (mm)4719
Width (mm)2068
Height, unladen (mm)1440
Wheelbase (mm)2851
Track, front (mm)1577
Track, rear (mm)1572
Luggage capacity (l)480
Fuel tank capacity (l)ca. 59

Weight

Unladen (EU) (kg)1785
Max permissible (kg)2400
Permitted load (kg)540
Max axle load, front (kg)1155
Max axle load, rear (kg)1255
Max trailer load, braked (kg)1800
Max trailer load, unbraked (kg)750

*Preliminary data.


New test procedure WLTP

Stated fuel consumption and CO2 emissions are measured pursuant to EU Regulation 715/2007 in its applicable version. From 1st of September 2018 the Worldwide Harmonized Light Vehicles Test Procedure (WLTP) has replaced the New European Driving Cycle (NEDC). Regardless of the applied test procedure, it is currently still mandatory to state fuel consumption and CO2 emissions according to NEDC, hence stated values are determined based on the WLTP test procedure and are converted to NEDC for comparison purposes. Depending on your country, vehicle related taxes or other duties may be based on fuel consumption and CO2 emissions data which differs from that stated here. The provision of additional fuel consumption and CO2 emissions as determined according to WLTP is currently voluntary until their provision becomes mandatory by law.

Further information on specific fuel consumption and CO2 emissions of new passenger cars is provided by the ‚Leitfaden über den Kraftstoffverbrauch, die CO2-Emissionen und den Stromverbrauch neuer Personenkraftwagen‘ which can be obtained free of charge at all points of sale and from the Deutsche Automobil Treuhand GmbH (DAT) or online https://www.dat.de/co2/.


Regardless of the applied test procedure, it is currently still mandatory to state fuel consumption and CO2 emissions according to NEDC, hence stated values are determined based on the WLTP test procedure and are converted to NEDC for comparison purposes. Depending on your country, vehicle related taxes or other duties may be based on fuel consumption and CO2 emissions data which differs from that stated here. The provision of additional fuel consumption and CO2 emissions as determined according to WLTP is currently voluntary until their provision becomes mandatory by law.

BMW ALPINA B3                                                          Saloon                 Touring
Fuel consumption, combined (WLTP):                          11.1 l/100km        11.1 l/100km
CO2 emissions combined (WLTP):                               252 g/km             252 g/km